A Step-By'-Step Guide For Double Glazing Door Lock Repairs
A Step-By'-Step Guide For Double Glazing Door Lock Repairs
Blog Article
Double Glazing Door Lock Repairs
Are you experiencing issues with your uPVC window or door mechanism faulty? Maybe the handles on your uPVC windows or doors aren't aligned correctly or are difficult to operate.
It's important that your double-glazed doors operate smoothly, otherwise you'll lose energy and increase the chances of burglary. Owen the Locksmith can fix your door lock for an affordable price.
Snapped Key
If a key breaks in a lock, it could be extremely annoying. It also poses a security risk since the door may not lock and make you vulnerable to intruders. Fortunately, there are some quick fixes you can attempt to fix the issue and get your door functioning correctly.
First, remember to stay calm. If you get scared and start doing a lot of fumbling around you could end up pushing the broken piece of the key deeper into the lock, thereby making the situation even more difficult.
Spray WD-40, or any other penetrating lubricant, into the lock. This will assist the broken piece emerge more easily. You can also employ a screwdriver in order to break pieces that could be blocking the way. If you're fortunate enough to have a bit of the key that is hanging out, you can make use of a paperclip or other metal object that is thin to grab it and then pull it out. Both of these methods work, but be careful not to push the damaged piece of the key deeper into the keyway.
Some paperclips have grooved edges that can serve as hook extractors and Jigsaw blades can also be used for this function. If you don't happen to have one of these tools you can bend a hook with needle-nosed pliers. Finally, you can make use of a pair of tweezers to grasp and pull out the remaining pieces of broken keys.
If you can't get the broken piece of key out, you can try using a lock de-icer. It is available in most hardware stores and is used to freeze any moisture present within the lock.
If none of these tricks appear to be working, it might be the time to contact a locksmith. Fitlocks experts can quickly resolve issues with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. Book a double glazing repair with us online or give us a phone call to discuss your needs.
Broken Cylinder
A broken cylinder can pose a serious security risk. Luckily, it's an easy repair for a professional locksmith to complete. To repair the cylinder, locksmiths will need to tap it. This can be done with a hammer, or any other tool. However, the best method is to use a wire or a long match. Then, position the end of the match or wire close to the keyway. The locksmith will then strike the lock to crack it. This is better than using a hammer that could damage the lock.
The most frequent cause for cracks in the head of a cylinder is due to overheating. This can occur when the cylinder block as well as the cylinder head are made of various metals, including cast iron and aluminum. When different metals heat up and cool down at different rates, it may cause localised hotspots that expand faster than the rest of the cylinder head, thus leading to cracks.
Another reason that could cause cracks in the cylinder is corrosion. If the head and block of the cylinder are not maintained in a timely manner they may corrosion or rust, which can cause them to expand more than anticipated. As time passes, this may also lead to cracks.
If your uPVC window or door lock is rigid and requires a lot of pressure to turn it could be due to a variety of reasons. A faulty locking mechanism, misalignment or a worn handle are common causes of this problem.
Fortunately, this is an easy and cost-effective fix for the majority of homeowners of double glazing. A professional locksmith can usually fix this problem within one hour of arriving at the home. Based on your requirements they can change the locking mechanism, change the window handles, or change the gearboxes. A professional website locksmith can always advise you on the most cost-effective solutions for your home. They can even suggest upgrades to 3 Star security TS007 euro cylinders that will add an extra layer of security against burglars. It's a small price to pay for the security that comes with knowing your uPVC doors are secure.
Broken Handle
It's not a surprise that window handle locks can break. They are equipped with complex mechanisms that wear out over time. If yours breaks it may be difficult to determine the source of the problem and make sure that you repair it correctly.
The issue could be related to the locking mechanism inside or the latch, fixing the broken handle will increase your uPVC double glazing door's security and allow you stop draughts. If you do not repair or replace your handle can be very expensive and could harm the door's frame as well as lock, so it's worth taking some time to make sure you do it right.
With the window in the open position then loosen the screw that secures the handle using a screwdriver. The screw should be on the inside face of the back plate, which is usually concealed by a screw cover for aesthetic reasons. It is not recommended to lose any internal components of the handle, such as the plates and levers on either side. It is best to keep them in the same order so you can re-install them if needed.
Next, turn the handle until it's 90 degrees towards the window frame. Then, loosen the screw at the back of the handle that holds it to the internal spindle by using another screwdriver. Once the screw is loose, you should be in a position to pull the handle off and take out the broken spindle. Replace it with here a new one, making sure it's the same size as the old one (you can usually find these online or in hardware stores) and screw it securely into the correct position. Be cautious not to overtighten as this could cause damage to the handle or the window frame.
Close the handle and test it. It should work smoothly, and you will be able to open your window once more.
Don't forget to double-check that your uPVC window is shut properly when you're working with the handle. If they're not cause damp and draughts in your home as in addition to compromising the efficiency of your home's energy usage. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they are able to shut properly.
Broken Spindle
It is usually the case that the spindle within a handle breaks rather than the handle itself. This is most common in uPVC tilt and turn windows. These windows require a handle that operates a locking device in the frame of the window. The handle is attached to a centre rod that here triggers a set of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism is not able to double glazed near me open after the handle has been turned, it double glazed window near me is likely the spindle is damaged. This can be a problem that is frustrating.
Luckily there are options to fix this problem. A skilled locksmith can quickly and efficiently solve the issue. They can disassemble the window handle by using a tool to remove the wheel portion of the mechanism that is where the spindle goes. This can be done without damaging the handle or causing any other damage to the frame of the window.
After removing the wheel, the technician can examine the spindle to determine what caused it to break. This involves disassembling the spindle and inspecting every component, observing any wear or damage. This procedure is usually performed in a clean room by skilled technicians.
Then, clean the damaged spindle. This will help get rid of any dirt or debris which may be obstructing it from working normally. Following this the spindle could be repaired or replaced. If the technician is replacing the spindle, he can use a dowel that is the same size to the original. Then, he will drill matching holes into both pieces. This will ensure that the spindle will fit perfectly with the handle.
If the damaged spindle is beyond repair, it may be necessary to replace it completely. Home centers sell generic replacements, but if your window design is unusual then you'll require contacting a cabinet maker or woodworker who can make the exact piece. After the spindle is installed, it is attached to the handle. The screw holes on the handle to the screws already in the frame. Once the handle is firmly set, you are able to operate your uPVC windows.